Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
 - Event Message Reference
- Miscellaneous Messages
 - Temperature Sensor Messages
 - Cooling Device Messages
 - Voltage Sensor Messages
 - Current Sensor Messages
 - Chassis Intrusion Messages
 - Redundancy Unit Messages
 - Power Supply Messages
 - Memory Device Messages
 - Fan Enclosure Messages
 - AC Power Cord Messages
 - Hardware Log Sensor Messages
 - Processor Sensor Messages
 - Pluggable Device Messages
 
 - System Event Log Messages for IPMI Systems
 - Storage Management Message Reference
 - Index
 
 
 - Messages Reference Guide
 

Storage Management Message Reference 77
2246 The controller battery 
is degraded.
Warning / 
Non-critical
Cause: The controller battery charge is weak.
Action: As the charge weakens, the charger 
should automatically recharge the battery. 
If the battery has reached its recharge limit, 
replace the battery pack. Monitor the battery 
to make sure that it recharges successfully. 
If the battery does not recharge, replace the 
battery pack.
1153 None
2247 The controller battery 
is charging.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
1151 None
2248 The controller battery 
is executing a 
Learn cycle.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
1151 None
2249 The array disk "Clear" 
operation has started.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
901 None
2251 The array disk blink 
has initiated.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
901 None
2252 The array disk blink 
has ceased.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
901 None
2254 The "Clear" operation 
has cancelled.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
901 None
2255 The array disk has 
started.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
901 None
2259 An enclosure blink 
operation has 
initiated.
Ok / 
Normal
Cause: This alert is provided for 
informational purposes.
Action: None
851 None
Table 4-1.  Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap 
Numbers
Array 
Manager 
Event 
Number










