Messages Reference Guide

96 Storage Management Message Reference
2355 Enclosure firmware
download failed.The
system was unable to
download firmware to
the enclosure. The
controller may have
lost communication
with the enclosure.
There may have been
problems with the
data transfer or the
download media may
be corrupt.
Warning /
Non-critical
Cause: The system was unable to download
firmware to the enclosure. The controller may
have lost communication with the enclosure.
There may have been problems with the data
transfer or the download media may be
corrupt.
Action: Attempt to download the enclosure
firmware again. If problems continue, check
if the controller can communicate with the
enclosure. Make sure that the enclosure is
powered on. Check the cables and the health
of the enclosure and its components.
To check the health of the enclosure, select
the enclosure object in the tree view. The
Health subtab displays a red X or yellow
exclamation point for enclosure components
that are failed or degraded.
853 None
2356 SAS SMP
communications error
%1.
NOTE: %1 is a
substitution variable
that will appear in the
alert description for
specific details about
the alert.
Critical /
Failure /
Error
Cause: The text for this alert is generated by
the firmware and can vary depending on the
situation. The reference to SMP in this text
refers to SAS Management Protocol.
Action: There may be a SAS topology error.
See the hardware documentation for
information on correct SAS topology
configurations. There may be problems with
the cables such as a loose connection or an
invalid cabling configuration. See the
hardware documentation for information on
correct cabling configurations. Check if the
firmware is a supported version.
754 None
Table 4-1. Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap
Numbers
Array
Manager
Event
Number