User's Manual

omreport: Viewing System Status Using the Instrumentation Service 63
Network Interface Card
The following details are listed for each NIC in the system:
• IP address
• Subnet mask
• Default gateway
• MAC address
Storage Enclosures
The following details are listed for each storage enclosure attached to the system:
•Name
• Product ID
omreport system thrmshutdown
Use the omreport system thrmshutdown command to view which properties, if any, have been
configured for a thermal shutdown action.
The three properties that display for thermal shutdown are disabled, warning, or failure. If the
CLI displays the following message, the thermal shutdown feature has been disabled:
Thermal protect shutdown severity: disabled
If the system is configured to shutdown when a temperature probe detects a warning or failure event, one
of the following messages displays:
Thermal protect shutdown severity: warning
Thermal protect shutdown severity: failure