User's Manual

66 omreport storage: Using the Storage Reports
omreport storage Commands
When you type:
omreport storage
Server Administrator displays a general status for storage components.
NOTE: As with all output shown in this guide, the following output is an example and may vary depending on your
system configuration.
Table 5-1. omreport storage Command Level 1, Level 2, and Level 3
Command
level 1
Command
level 2
Command
level 3
User privilege
required
Use
omreport
storage A Displays a high-level status for all
storage components.
arraydisks A Displays a high-level status for array disks.
arrays A Displays detailed information for an array
disk on a particular controller.
osdiskinfo A Displays detailed information for a
particular operating system disk.
osdisks A Displays operating system disk properties.
volumes A Displays properties for all volumes.
enclosures A Displays properties for all enclosures.
enclosureinfo A Displays detailed information for a
particular enclosure.
SEVERITY : COMPONENT
Ok : Array Subsystems
Warning : OS Disks
Ok : Volumes