Messages Reference Guide

44 System Event Log Messages for IPMI Systems
Voltage Sensor Events
The voltage sensor event messages monitor the number of volts across critical components.
These
messages provide status and warning information for voltage sensors for a particular chassis.
Table 3-2. Voltage Sensor Events
Event Message Severity Cause
< Sensor Name/Location > voltage
sensor detected a failure <
Reading >
where <
Sensor Name/Location > is the
entity that this sensor is
monitoring.
Reading is specified in volts.
For example, 3.860 V.
Critical The voltage of the monitored device has
exceeded the critical threshold.
<
Sensor Name/Location > voltage
sensor state asserted.
Critical The voltage specified by
<Sensor Name/Location> is in critical state.
<
Sensor Name/Location > voltage
sensor state de-asserted.
Information The voltage of a previously reported
<Sensor Name/Location> is returned to
normal state.
<
Sensor Name/Location > voltage
sensor detected a warning
<
Reading >.
Warning Voltage of the monitored entity
<Sensor Name/Location> exceeded the
warning threshold.
<
Sensor Name/Location > voltage
sensor returned to normal
<
Reading >.
Information The voltage of a previously reported
<Sensor Name/Location> is returned to
normal state.