User's Manual

164 Using the Storage Management Service
omreport Virtual Disk Status
adisk=connectorID : targetID
| connectorID : enclosureID :
slotID
where connectorID:targetID is
the connector number and the
array disk number and
connectorID:enclosureID:slotID
is the connector number,
enclosure number, and slot
number.
For example: adisk=0:2 or
adisk=0:1:2
Displays the specified array disk
on the specified connector on
the controller.
Table 9-14. omreport Virtual Disk Commands
Required Command Levels (1, 2, 3) Optional name=value pairs Use
omreport storage vdisk Displays property information for
all virtual disks on all controllers.
controller=id
where id is the controller number.
For example: controller=0.
Displays all virtual disks on the
specified controller.
controller=id vdisk=id
where id is the controller number
and the virtual disk number. For
example: controller=0 vdisk=1.
Displays the specified virtual disk
on the controller.
Table 9-13. omreport Array Disk Commands (continued)
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use