User's Manual

Using the Storage Management Service 165
omconfig Global Commands
The following sections provide the omconfig command syntax required to execute the global commands.
When executed, these commands apply to all controllers. These global commands also correspond to the
global tasks provided by the Storage tree view object’s Information/Configuration subtab.
omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a
critical temperature of 0 or 50
° Celsius. If you have implemented connector redundancy on the PV220S
and PV221S enclosures, however, you can specify that only the enclosure and not the operating system
and server be shut down when the enclosure reaches a critical temperature of 0 or 50
° Celsius. Specifying
that only the enclosure be shutdown during excessive temperatures is known as Smart Thermal
Shutdown. See the online help for more information.
Use the following omconfig command syntax to enable smart thermal shutdown.
Complete Syntax
omconfig storage globalinfo action=enablests
Example Syntax
The omconfig command syntax for enabling thermal shutdown does not require that you specify a
controller or enclosure ID. To enable thermal shutdown, enter the following:
omconfig storage globalinfo action=enablests
NOTE: You can use the omreport storage globalinfo command to determine whether smart thermal shutdown is
currently enabled or disabled. The status of smart thermal shutdown is also displayed by the Server Administrator
graphical user interface. To locate this status, select the Storage object and the Information/Configuration tab.
Table 9-15. omconfig Global Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage globalinfo
action=enablests
action=disablests
action=globalrescan