User's Manual

176 Using the Storage Management Service
Example Syntax
For example, to set the check consistency rate to 50 on controller 1, enter:
omconfig storage controller action=setcheckconsistency controller=1
rate=50
omconfig Export the Controller Log
Use the following omconfig command syntax to export the controller log to a text file. For more
information about the exported log file, see the online help.
Complete Syntax
omconfig storage controller action=exportlog controller=id
where id is the controller ID as reported by the omreport storage controller command.
Example Syntax
For example, to export the log on controller 1, enter:
omconfig storage controller action=exportlog controller=1
By default, the log file is exported to C:\WinNt or C:\Windows for Microsoft
®
Windows
®
systems (based
on the Windows version used) and /var/log on all Linux systems.
Depending on the controller, the log file name will be either afa_<mmdd>.log or lsi_<mmdd>.log
where <mmdd> is the month and date. For more information on the controller log file, see the
online help.
NOTE: The export log file command is not supported on the PERC 2/SC, 2/DC, 4/IM, CERC ATA 100/4ch, and CERC
SATA 1.5/2s controllers.
omconfig Import Foreign Configuration
Use the following omconfig command syntax to import all virtual disks that reside on array disks newly
attached to the controller.
Complete Syntax
omconfig storage controller action=importforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller command.
Example Syntax
For example, to import foreign configurations on controller 1, enter:
omconfig storage controller action=importforeignconfig controller=1