User's Manual

Using the Storage Management Service 195
omconfig Cancel Rebuild Array Disk
Use the following omconfig command syntax to cancel a rebuild that is in progress. If you cancel a
rebuild, the virtual disk remains in a degraded state. See the online help for more information.
Complete Syntax
omconfig storage adisk action=cancelrebuild controller=id adisk=
<ADISKID>
where id is the controller ID. The <ADISK> variable specifies the array disk.
To obtain these values, enter omreport storage controller to display the controller IDs and then enter
omreport storage adisk controller=ID to display the IDs for the array disks attached to the controller.
Example Syntax
In this example, you want to cancel the rebuild or array disk 3 on connector 0 of controller 1. On a SAS
controller, the array disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers:
To cancel the rebuild of the array disk described in this example, enter:
omconfig storage adisk action=cancelrebuild controller=1 adisk=0:3
Example for SAS Controllers:
To cancel the rebuild of the array disk described in this example, enter:
omconfig storage adisk action=cancelrebuild controller=1 adisk=0:2:3
omconfig Remove Dead Segments
Use the following omconfig command syntax to recover unusable disk space. See the online help for
more information.
Complete Syntax
omconfig storage adisk action=removedeadsegments controller=id
adisk=<ADISKID>
where id is the controller ID. The <ADISK> variable specifies the array disk.
To obtain these values, enter omreport storage controller to display the controller IDs and then enter
omreport storage adisk controller=ID to display the IDs for the array disks attached to the controller.
Example Syntax
In this example, you want to remove dead disk segments on array disk 3 on connector 0 of controller 1.
On a SAS controller, the array disk resides in enclosure 2.