User's Manual

78 omconfig: Managing Components Using the Instrumentation Service
attribute=romb setting=raid | off | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard as a RAID device.
off: Disable the device during
system boot.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=romba setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel A as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of
setting change.
attribute=rombb setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel B as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=sata setting=off | ata | raid off: Disables SATA controller.
ata: Sets the onboard SATA controller to
ATA mode.
raid: Sets the onboard SATA controller
to RAID mode.
attribute=sataport (0...7)
or (A...H)
setting=off | auto off: Disables the SATA port.
auto: Automatically enable the
SATA port.
attribute=secondaryscsi setting=on | off on: Enables this device.
off: Disables this device.
Table 5-2. BIOS Setup (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description