Reference Guide

Storage Management Alert Reference 611
2100 Temperature
exceeded the
maximum
warning
threshold
Warning /
Non-critical
Cause: The array disk enclosure is too hot. A variety of
factors can cause the excessive temperature. For
example, a fan may have failed, the thermostat may be
set too high, or the room temperature may be too hot.
Action: Check for factors that may cause overheating.
For example, verify that the enclosure fan is working.
You should also check the thermostat settings and
examine whether the enclosure is located near a heat
source. Make sure the enclosure has enough ventilation
and that the room temperature is not too hot. See the
enclosure documentation for more
diagnostic information.
1053 591
2101 Temperature
dropped below
the minimum
warning
threshold
Warning /
Non-critical
Cause: The array disk enclosure is too cool.
Action: Check whether the thermostat setting is too
low and whether the room temperature is too cool.
1053 592
2102 Temperature
exceeded the
maximum
failure
threshold
Critical /
Failure / Error
Cause: The array disk enclosure is too hot. A variety of
factors can cause the excessive temperature. For
example, a fan may have failed, the thermostat may be
set too high, or the room temperature may be too hot.
Action: Check for factors that may cause overheating.
For example, verify that the enclosure fan is working.
You should also check the thermostat settings and
examine whether the enclosure is located near a heat
source. Make sure the enclosure has enough ventilation
and that the room temperature is not too hot. See the
enclosure documentation for more diagnostic information.
1054 593
2103 Temperature
dropped below
the minimum
failure
threshold
Critical /
Failure / Error
Cause: The array disk enclosure is too cool.
Action: Check whether the thermostat setting is too
low and whether the room temperature is too cool.
1054 594
2104 Controller
battery is
reconditioning
OK/Normal/
Informational
Cause: This alert is provided for informational purposes.
Action: None.
1151 581
Table 26-2. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action SNMP
Trap
Numbers
Array
Manager
Event
Number