Reference Guide

Storage Management Message Reference 107
2321 Single-bit ECC error.
The DIMM is
critically degraded.
There will be no
further reporting.
Critical /
Failure /
Error
Cause: The DIMM is malfunctioning.
Data loss or data corruption is imminent.
The DIMM must be replaced immediately.
No further alerts will be generated.
Action: Replace the DIMM immediately. The
DIMM is a part of the controller battery pack.
See your hardware documentation for
information on replacing the DIMM.
None 754
2322 The DC power
supply is switched
off.
Critical /
Failure /
Error
Cause: The power supply unit is switched off.
Either a user switched off the power supply
unit or it is defective.
Action: Check if the power switch is turned
off. If it is turned off, turn it on. If the
problem persists, check if the power cord is
attached and functional. If the problem is
still not corrected or if the power switch is
already turned on, replace the power supply
unit.
2323 1004
2323 The power supply is
switched on.
Ok / Normal Cause: This alert is for informational purposes.
Action: None
Clear
event
1001
2324 The AC power
supply cable has
been removed.
Critical /
Failure /
Error
Cause: The power cable may be pulled out
or removed. The power cable may also have
overheated and become warped and
nonfunctional.
Action: Replace the power cable.
2325 1004
2325 The power supply
cable has been
inserted.
Ok / Normal Cause: This alert is for informational purposes.
Action: None
Clear
event
1001
2326 A foreign
configuration has
been detected.
Ok / Normal Cause: This alert is for informational purposes.
The controller has physical disks that were
moved from another controller. These
physical disks contain virtual disks that were
created on the other controller. See the Import
Foreign Configuration and Clear Foreign
Configuration section in the Dell OpenManage
Server Administrator Storage Management
User’s Guide for more information.
Action: None
None 751
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Clear
Event
Number
SNMP
Trap
Numbers