Reference Guide

Storage Management Message Reference 77
2115 A consistency check
on a virtual disk has
been resumed
Ok / Normal Cause: This alert is for informational purposes.
The check consistency operation on a virtual
disk has resumed processing after being
paused by a user.
Action: None
Clear
event
1201
2116 A virtual disk and its
mirror have been
split
Ok / Normal Cause: This alert is for informational purposes.
A user has caused a mirrored virtual disk to be
split. When a virtual disk is mirrored, its data
is copied to another virtual disk in order to
maintain redundancy. After being split, both
virtual disks retain a copy of the data,
although because the mirror is no longer
intact, updates to the data are no longer copied
to the mirror.
Action: None
None 1201
2117 A mirrored virtual
disk has been
unmirrored
Ok / Normal Cause: This alert is for informational purposes.
A user has caused a mirrored virtual disk to be
unmirrored. When a virtual disk is mirrored,
its data is copied to another virtual disk in
order to maintain redundancy. After being
unmirrored, the disk formerly used as the
mirror returns to being a physical disk and
becomes available for inclusion in another
virtual disk.
Action: None
None 1201
2118 Change write policy Ok / Normal Cause: This alert is for informational purposes.
A user has changed the write policy for a
virtual disk.
Action: None
None 1201
2120 Enclosure firmware
mismatch
Warning /
Non-critical
Cause: The firmware on the EMM is not the
same version. It is required that both modules
have the same version of the firmware. This
alert may be caused when a user attempts to
insert an EMM module that has a different
firmware version than an existing module.
Action: Download the same version of the
firmware to both EMM modules.
None 853
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Clear
Event
Number
SNMP
Trap
Numbers