Users Guide
Table Of Contents
- User’s Guide
- Contents
- Introduction
- What’s New for Version 5.1
- Setup and Administration
- Installing Server Administrator
- Using Server Administrator
- Instrumentation Service
- Remote Access Service
- Overview
- Hardware Prerequisites
- Software Prerequisites
- Adding and Configuring DRAC Users
- Configuring an Existing DRAC User
- Configuring the DRAC Network Properties
- Configuring the DRAC Alert Properties
- Configuring DRAC III Dial-in (PPP) Users and Modem Settings
- Configuring the DRAC Remote Features Properties
- Configuring DRAC Security
- Accessing and Using a Dell Remote Access Controller
- Working With the Baseboard Management Controller (BMC)
- Storage Management Service
- Server Administrator Logs
- Troubleshooting
- Glossary
- Index
![](/manual/dell/openmanage-server-administrator-version-5-1/users-guide-english/images/img-109.png)
110 Storage Management Service
Migrating from Array Manager to the Storage Management
If you replace an existing Array Manager installation with Storage Management, the following migration
considerations apply:
•
Virtual Disk Preservation
. You can preserve the virtual disk names when migrating from Array
Manager to Storage Management. To do so, however, you must not uninstall Array Manager prior to
installing Storage Management. If Array Manager is uninstalled prior to installing Storage
Management, then Storage Management will rename the virtual disks created with Array Manager.
Whether or not Array Manager is uninstalled, Storage Management will be able to identify and
manage the virtual disks created with Array Manager.
•
SNMP Traps
. The architecture for handling the SNMP traps and the Management Information Base
(MIB) is different in Storage Management than Array Manager. You may need to modify applications
that have been customized to receive SNMP traps from Array Manager.
•
Event Numbering.
The numbering scheme for Storage Management alerts or events is different than
the numbers used for the corresponding Array Manager events. See the Storage Management online
help for more information.
Storage Management Command Line Interface
See the Server Administrator Command Line Interface User's Guide for information about running the
Storage Management Service from the command line. If you have the Storage Management installed,
you can also refer to the online help for information about the expanded omreport and omconfig
command line options.
Displaying Online Help
Server Administrator provides context-sensitive online help. To access the online help, click Help on the
global navigation bar. This navigation is available for all windows accessible to the user based on user
privilege level and the specific hardware and software groups that Server Administrator discovers on the
managed system.
The Storage Management provides additional online help. This help is available when the Storage or a
lower-level tree object is selected.
The online help of the Storage Management Service:
• Provides conceptual information on storage concepts such as virtual disks, RAID, and so on
• Describes the graphical user interface components in the various windows of the application
• Gives detailed, step-by-step instructions on the tasks that you can perform in the graphical user
interface
• Describes the available CLI commands and their subcommands