Messages Reference Guide

Storage Management Message Reference 115
2290 Single-bit
ECC error.
Warning /
Non-critical
Cause: An error involving a single bit
has been encountered during a read
or write operation. The error
correction algorithm has corrected
this error.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2060
753
2291 An EMM has
been
discovered.
Ok / Normal Cause: This alert is for informational
purposes.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
851
2292 Communicatio
n with the
enclosure has
been lost.
Critical /
Failure /
Error
Cause: The controller has lost
communication with an EMM. The
cables may be loose or defective.
Action: Make sure the cables are
attached securely. Reboot the system.
Clear Alert Number: 2162.
Related Alert Number: None.
LRA Number: 2091
854
2293 The EMM has
failed.
Critical /
Failure /
Error
Cause: The failure may be caused by
a loss of power to the EMM. The
EMM self test may also have
identified a failure. There could also
be a firmware problem or a multi-bit
error.
Action: Replace the EMM. See the
hardware documentation for
information on replacing the EMM.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2091
854
2294 A device has
been inserted.
Ok / Normal Cause: This alert is for informational
purposes.
Action: None
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: None.
851
2295 A device has
been removed.
Critical /
Failure /
Error
Cause: A device has been removed
and the system is no longer
functioning in optimal condition.
Action: Replace the device.
Clear Alert Number: None.
Related Alert Number: None.
LRA Number: 2091
854
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related Alert Information SNMP
Trap
Numbers