SNMP Reference Guide

Baseboard Management Controller Group 487
Baseboard Management Controller
Group
The Baseboard Management Controller (BMC) monitors the system for
critical events by communicating with various sensors on the system board
and sends alerts and log events when certain parameters exceed their preset
thresholds. The BMC Group provides information about the BMC that may
be present in your system. In addition to providing general information about
the BMC, this group provides information about the serial and local area
network (LAN) interfaces of the BMC.
Baseboard Management Controller Group Tables
The objects in the BMC group define information about the BMC and the
serial and LAN interfaces that can be used to access the BMC remotely to
perform management activities. Objects for the serial interface define the
serial connection mode, flow control type and bit rate. Objects for the LAN
interface define the media access control (MAC) address, internet protocol
(IP) address, subnet mask and default gateway.
The following MIB tables define the BMC group:
• Baseboard Management Controller Table
• Baseboard Management Controller Serial Interface Table
• Baseboard Management Controller LAN Interface Table
Baseboard Management Controller Table
Name bmcTable
Object ID 1.3.6.1.4.1.674.10892.1.1900.10
Description Defines the Baseboard Management Controller Table.
Syntax SEQUENCE OF BmcTableEntry
Access Not accessible