User's Manual

omconfig system or servermodule assetinfo: Editing Cost of Ownership Values 119
Example Command for Adding Lease Information
To provide a value for a lease parameter, type a command of the form:
omconfig system assetinfo info=lease <name=value pair 2> or
omconfig servermodule assetinfo info=lease <name=value pair 2>. For
example, type:
omconfig system assetinfo info=lease value=4500
or
omconfig servermodule assetinfo info=lease value=
4500
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Adding Maintenance Information
Maintenance refers to activities required to keep the system in good working
order. Table 5-6 shows the valid parameters for adding maintenance
information.
multischedule
=true | false
Whether cost of leasing the
system is computed by more
than one rate schedule.
ratefactor=
<factor>
Factor used to calculate the
lease payment.
value=
<residual>
Fair market value of the system
at the end of the lease period.
Table 5-5. omconfig system assetinfo info=lease/omconfig servermodule assetinfo
info=lease (continued)
Command
Level 1
Command
Level 2
Comman
d Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description