User's Manual

122 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Adding Owner Information
The owner is the party that holds legal property title to the system. Table 5-8
shows the valid parameters for adding owner information.
Example Command for Adding Owner Information
To provide a value for an owner parameter, type a command of the form:
omconfig system assetinfo info=owner <name=value pair 2> or
omconfig servermodule assetinfo info=owner <name=value pair 2>. For
example, type:
omconfig system assetinfo info=owner type=rented
or
omconfig servermodule assetinfo info=owner type=
rented
The following message appears:
Asset information set successfully.
Table 5-8. omconfig system assetinfo info=owner/omconfig servermodule assetinfo
info=owner
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description
omconfig
system/server
module
assetinfo
info=owner
insuranceco=
<company>
Name of the insurance
company that insures the
system.
ownername=
<business>
Business entity that owns the
system.
type=owned |
leased | rented
Whether the user of the
system owns, leases, or rents
the system.