User's Manual

126 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
Example Command for Adding System Information
To provide a value for a system parameter, type a command of the form:
omconfig system assetinfo info=system <name=value pair 2> or
omconfig servermodule assetinfo info=system <name=value pair 2>. For
example, type:
omconfig system assetinfo info=system location=
firstfloor
or
omconfig servermodule assetinfo info=system
location=firstfloor
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Table 5-11. omconfig system assetinfo info=system/omconfig servermodule assetinfo
info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig
system/server
module
assetinfo
info=
system
location=<text> Location of the system.
primaryphone=<n> Phone number of the
system's primary user.
primaryuser=<user> Primary user of the
system.