User's Manual

Using the Storage Management Service 161
Complete Syntax
omconfig storage vdisk action=unblink controller=
id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To blink the physical disks in virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=unblink controller=1
vdisk=4
omconfig Initialize Virtual Disk
Use the following omconfig command syntax to initialize a virtual disk.
Complete Syntax
omconfig storage vdisk action=initialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To initialize virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=initialize
controller=1 vdisk=4
omconfig Cancel Initialize Virtual Disk
Use the following omconfig command syntax to cancel the initialization of a
virtual disk.