User's Manual

Using the Storage Management Service 163
Complete Syntax
omconfig storage vdisk action=slowinit controller=
id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To slow initialize virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=slowinit controller=
1 vdisk=4
omconfig Cancel Background Initialize
Use the following omconfig command syntax to cancel the background
initialization process on a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=
ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel background initialization on virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=cancelbginitialize
controller=1 vdisk=4
omconfig Restore Dead Segments
Use the following omconfig command syntax to recover data from a RAID-5
virtual disk that has been corrupted. This task attempts to reconstruct data
from a corrupt portion of a physical disk included in a RAID-5 virtual disk.