User's Manual

178 Using the Storage Management Service
Example Syntax
In this example, you want to offline physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To offline the physical disk described in this example, enter:
omconfig storage pdisk action=offline controller=1
pdisk=0:3
Example for SAS Controllers
To offline the physical disk described in this example, enter:
omconfig storage pdisk action=offline controller=1
pdisk=0:2:3
omconfig Online Physical Disk
Use the following omconfig command syntax to bring an offline physical disk
back online.
Complete Syntax
omconfig storage pdisk action=online controller=id
pdisk=<PDISKID>
where id is the controller ID. The <PDISK> variable specifies the physical
disk.
To obtain these values, enter omreport storage controller to display the
controller IDs and then enter omreport storage pdisk controller=ID to
display the IDs for the physical disks attached to the controller.
Example Syntax
In this example, you want to bring physical disk 3 on connector 0 of controller
1 back online. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To bring the physical disk described in this example back online, enter:
omconfig storage pdisk action=online controller=1
pdisk=0:3