User's Manual

omreport: Viewing System Status Using the Instrumentation Service 27
Table 3-2. Command Level 1, Level 2, and Level 3 for omreport
Command
Level 1
Command
Level 2
Command
Level 3
User
Privilege
Required
Use
omreport
modularen
closure
U, P, A Shows information for all the modular
chassis.
about U, P, A Shows version number and properties for
Server Administrator.
details=true U, P, A Displays information for all the Server
Administrator programs installed.
chassis/mai
nsystem
U, P, A Shows the general status of all the main
components.
acswitch U, P, A Shows failover settings where redundant
AC power lines are supported in a system.
batteries U, P, A Shows the properties set for batteries.
bios U, P, A Shows BIOS information such as
manufacturer, version, and date last
updated.
biossetup A Shows BIOS setup properties configured
during system boot.
fancontrol U, P, A Shows the properties set for fan speed.
fans U, P, A Shows the status and thresholds for system
fans.
firmware U, P, A Shows firmware properties such as version,
date of last update, and whether the
firmware is updatable.
frontpanel U, P, A Shows whether the front panel button
settings, such as the Power button and/or
Nonmasking Interrupt (NMI) button
(if present on the system), are enabled or
disabled.
fru U, P, A Shows the Field Replaceable Unit (FRU)
information.
hwperformance U, P, A Shows the status and cause for the
system’s performance degradation.