User's Manual

omreport: Viewing System Status Using the Instrumentation Service 29
alertaction U, P, A Shows warning and failure threshold
values, as well as actions configured when
an essential component detects a warning
or failure state.
alertlog U, P, A Allows the administrator to display the
alert log.
assetinfo U, P, A Shows the cost of ownership information
for your system.
cmdlog U, P, A Allows the administrator to display the
command log.
esmlog U, P, A Allows the administrator to display the
hardware log.
events U, P, A Shows the system’s Simple Network
Management Protocol (SNMP) event
settings.
operatingsyste
m
U, P, A Shows the name and version of your
operating system.
pedestinations U, P, A Shows destinations where alerts for
platform events are configured to be sent.
platformevents U, P, A Shows the system’s response for each listed
platform event.
recovery P, A Shows how your system is configured to
respond to a hung operating system.
shutdown P, A Shows how the shutdown action is to be
performed.
summary U, P, A Shows the key facts for all system
components, including main system
chassis, software, and storage.
thrmshutdown P, A Shows the shutdown action, if any, to be
taken when a temperature warning or
failure condition is detected.
version U, P, A Shows a summary for all updatable
components on your system.
Table 3-2. Command Level 1, Level 2, and Level 3 for omreport (continued)
Command
Level 1
Command
Level 2
Command
Level 3
User
Privilege
Required
Use