User's Manual

omreport: Viewing System Status Using the Instrumentation Service 35
Dual NIC Displays whether NIC 1 and NIC 2 with PXE/iSCSI is enabled or
disabled.
External Serial Connector Displays whether the external serial connector is mapped to
COM port 1 or COM port 2 or a Remote Access Device.
Console Redirection
Failsafe Baud Rate
Displays the setting for console redirection failsafe baud rate.
Embedded Hypervisor Displays whether the embedded hypervisor is enabled or disabled.
IDE Displays whether the drive is enabled or disabled.
IDE Primary Drive 0 Displays whether the device is automatically detected and enabled
or if the device is disabled.
IDE Primary Drive 1 Displays whether the device is automatically detected and enabled
or if the device is disabled.
Internal USB Displays whether internal USB is enabled or disabled.
Intrusion Displays whether the intrusion check is enabled or disabled during
system boot.
Mouse Displays whether the mouse is enabled or disabled.
NIC 1 Displays whether the first NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 2 Displays whether the second NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
Numlock Displays whether the keypad can be used as number keys.
Optical Drive Controller Displays whether the optical drive controller is enabled or disabled.
Parallel port address Displays whether the address is located on LPT1, LPT2, and LPT3,
or if it is disabled.
Parallel port mode Displays the setting associated with the parallel port.
Primary SCSI Displays whether the device is on or off.
RAID on motherboard Displays whether RAID-on-motherboard is detected as a
RAID device, a SCSI device, or if the device is disabled during
system boot.
Table 3-3. BIOS Setup Parameters (continued)
Parameters Description