User's Manual

42 omreport: Viewing System Status Using the Instrumentation Service
omreport chassis nics/omreport mainsystem nics
Use the omreport chassis nics or omreport mainsystem nics command to
view NIC properties. Type:
omreport chassis nics index=n
or
omreport mainsystem nics index=n
The index parameter is optional. If you do not specify the index, Server
Administrator displays properties about all NICS on your system. If you
specify the index, Server Administrator displays properties for a specific NIC.
Values display for the following fields: Index (number of the NIC card),
IP Address, Vendor, Description, and Connection Status.
omreport chassis ports/omreport mainsystem ports
Use the omreport chassis ports or omreport mainsystem ports command to
view properties of your system’s parallel and serial ports.
Values display for the following fields: Port Type, External Name, Base
I/O Address, IRQ Level, Connector Type, and Maximum Speed.
Port Type is the detailed type of each system port, from the more general
serial, parallel, and USB ports to the names of ports by device type connected
to it, for example, pointing device or keyboard.
External Name is the name of the port, such as serial or parallel, USB, mouse,
keyboard, and so on.
Base I/O Address is the starting I/O address expressed in hexadecimal.
IRQ Level is a hardware interrupt on a system. The hardware interrupt signals
the system's CPU that an event has started or ended in a peripheral
component such as a modem or printer. When communicated over a
peripheral component interconnect card, the IRQ level is a standard way to
identify the type of device that is sending the interrupt request.
Connector Type refers to the type of plug or cable and plug that connects
two devices together, in this case, the type of connector that attaches an
external device to a system. There are many connector types, each designed to
connect a different device type to a system. Examples include DB-9 Male, AT,
Access Bus, PS/2, and so on.