User's Manual

74 omconfig: Managing Components Using the Instrumentation Service
attribute=ppaddress setting=off | lpt1 | lpt2 |
lpt3
off: Disables the parallel port address.
lpt1: Locates the device on LPT1.
lpt2: Locates the device onLPT2.
lpt3: Locates the device on LPT3.
attribute=ppmode setting=at | ps2 | ecp |
epp
at: Sets the parallel port mode to type AT.
ps2: Sets the parallel port mode to type PS/2.
ecp: Sets the parallel port mode to type ECP
(extended capabilities port).
epp: Sets the parallel port mode to type EPP
(enhanced parallel port).
attribute=
primaryscsi
setting=on | off
force=true
NOTICE: If you modify the setting for primary
scsi, romb, romba, or rombb, your
system becomes inoperable until you
reinstall the operating system.
on: Enables this device.
off: Disables this device.
force=true: Verification of setting change.
attribute=romb setting=raid | off | scsi
force=true
raid: Instructs the BIOS to detect RAID-on-
motherboard as a RAID device.
off: Disables the device during system boot.
scsi: Instructs the BIOS to detect this device
as a SCSI device.
force=true: Verification of setting change.
attribute=romba setting=raid | scsi
force=true
raid: Instructs the BIOS to detect RAID-on-
motherboard channel A as a RAID device.
scsi: Instructs the BIOS to detect this device
as a SCSI device.
force=true: Verification of setting change.
attribute=rombb setting=raid | scsi
force=true
raid: Instructs the BIOS to detect RAID-on-
motherboard channel B as a RAID device.
scsi: Instructs the BIOS to detect this device
as a SCSI device.
force=true: Verification of setting change.
Table 4-3. BIOS Setup Settings (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description