Users Guide
Working with BMC/iDRAC 127
Viewing Basic BMC Information
You can view the basic information about the BMC and also reset the BMC
settings to their default values.
NOTE: You must be logged in with Administrator privileges to reset the BMC
settings.
1
Click the
Modular Enclosure
→
System/Server Module
→
Main System
Chassis/Main System
→
Remote Access
object.
The
Remote Access
page displays the following base information of the
system’s BMC:
• BMC Name/iDRAC Name
• IPMI Version
• System GUID
• Number of Possible Active Sessions
• Number of Current Active Sessions
• IPMI Over LAN Enabled
• SOL Enabled
• IP Address Source
• IP Address
• IP Subnet
•IP Gateway
• MAC Address
Configuring BMC/iDRAC Users
BMC/iDRAC users can be configured using the Remote Access page; this
page is accessed by browsing through the following path.
1
Click the
Modular Enclosure
→
System/Server Module
→
Main System
Chassis/Main System
→
Remote Access
object.
2
Click the
Users
tab.
The
Remote Access Users
window displays information about users that
can be configured as BMC/iDRAC users.