Users Guide
134 Working with BMC/iDRAC
3
Click
LAN
.
The
LAN Configuration
window appears.
NOTE: BMC/iDRAC management traffic will not function properly if the LAN
on motherboard (LOM) is teamed with any network adapter add-in-cards.
4
Configure the following NIC configuration details:
• Enable NIC (This option is available on Dell PowerEdge
x9xx
systems
and when DRAC is installed. Select this option for NIC teaming.
In
Dell PowerEdge
x9xx systems, you can team NICs for added
redundancy.)
• NIC Selection
NOTE: Enable NIC and NIC Selection cannot be configured on system with
iDRAC installed.
• MAC Address
• Enable IPMI Over LAN
• IP Address Source
• IP Address
• Subnet Mask
• Gateway Address
• Channel Privilege Level Limit
• Encryption Key (This option is available on Dell PowerEdge
x9xx
systems.)
5
Configure the following optional VLAN configuration details:
NOTE: VLAN configuration is not applicable for systems with iDRAC
• Enable VLAN ID
• VLAN ID
• Priority
6
Click
Apply Changes.