Users Guide

146 Storage Management Service
Connector Tasks
The following connector tasks are available when the Connector object is
selected. See the Storage Management online help for more information.
• Rescan Connector: This task rescans the controller connectors to verify
the currently connected devices or to recognize new devices that have been
added to the connectors. Performing a rescan on a connector is similar to
performing a rescan on the controller.
Enclosure Tasks
The following enclosure tasks are available when the Enclosure object is
selected. See the Storage Management online help for more information.
• Enable and Disable Alarm: Use these tasks to manage the enclosure
alarm. When enabled, the alarm sounds when the enclosure encounters an
error condition.
•
Set Asset Data: Use this task to change the enclosure's asset tag and
asset name.
•
Set Temperature Probe Values: The temperature probes monitor the
enclosure's temperature. Each temperature probe has a Warning and a
Failure threshold. The Warning threshold indicates that the enclosure is
approaching an unacceptably warm or cool temperature. Use this task to
modify the Warning threshold.
•
Blink: Use the Blink task to blink the light-emitting diodes (LEDs) on the
enclosure. You may want to use this task to locate an enclosure. The LEDs
on the enclosure may display different colors and blinking patterns.
Temperatures Tasks
The following temperature probe tasks are available when the Temperatures
object is selected. See the Storage Management online help for more
information.
• Set Temperature Probe: The temperature probes monitor the enclosure's
temperature. Each temperature probe has a Warning and a Failure
threshold. The Warning threshold indicates that the enclosure is
approaching an unacceptably warm or cool temperature. Use this task to
modify the Warning threshold.