Users Guide

92 Instrumentation Service
Selecting DRAC allows you to access your system's remote system
management capabilities. The Server Administrator DRAC provides remote
access to inoperable systems, alert notification when a system is down, and
the ability to restart a system.
The Remote Access object action window can have the following tabs,
depending on the user's group privileges: Properties, Configuration, and Users.
Properties
Subtab: Information
Under the Properties tab, you can view general BMC/iDRAC or DRAC
information. Click Reset to Defaults to reset all the attributes to their system
default values.
Configuration
Subtabs: LAN | Serial Port | Serial Over LAN
Under the Configuration tab when BMC/iDRAC is configured, you can
configure the BMC/iDRAC on a LAN, serial port for BMC/iDRAC, and
BMC/iDRAC on a serial over LAN connection.
Under the Configuration tab when DRAC is configured, you can:
• Configure network properties
• Configure SNMP traps
• Configure demand dial-out entries
• Configure dial-in users
• Configure remote properties such as remote boot parameters
• Configure modem properties
NOTE: The Enable NIC, NIC Selection, and Encryption Key fields display only on
Dell PowerEdge x9xx systems.