Messages Reference Guide

14 Introduction
<Additional power
supply status
information>
Specifies information pertaining to the event,
for example:
Power supply input AC is off,
Power supply
POK (power OK) signal is not
normal, Power supply is turned off
Chassis intrusion
state:
<Intrusion
state>
Specifies the chassis intrusion state (open or
closed), for example:
Chassis intrusion state: Open
Chassis location:
<Name
of chassis>
Specifies name of the chassis that generated the
message, for example:
Chassis location: Main System
Chassis
Configuration error
type:
<type of configuration
error>
Specifies the type of configuration error that
occurred, for example:
Configuration error type: Revision
mismatch
Current sensor value
(in Amps):
<Reading>
Specifies the current sensor value in amps,
for example:
Current sensor value (in Amps):
7.853
Date and time of action:
<Date and time>
Specifies the date and time the action was
performed, for example:
Date and time of action: Sat Jun
12 16:20:33 2004
Device location:
<
Location in chassis >
Specifies the location of the device in the
specified chassis, for example:
Device location: Memory Card A
Discrete current state:
<State>
Specifies the state of the current sensor, for
example:
Discrete current state: Good
Table 1-2. Event Description Reference (continued)
Description Line Item Explanation