Messages Reference Guide

Introduction 15
Discrete temperature
state:
<State>
Specifies the state of the temperature sensor,
for example:
Discrete temperature state: Good
Discrete voltage state:
<State>
Specifies the state of the voltage sensor,
for example:
Discrete voltage state: Good
Fan sensor value:
<Reading>
Specifies the fan speed in revolutions per minute
(RPM) or On/Off, for example:
Fan sensor value (in RPM): 2600
Fan sensor value: Off
Log type:
<Log type> Specifies the type of hardware log, for example:
Log type: ESM
Memory device bank
location:
<Bank name in
chassis>
Specifies the name of the memory bank in the
system that generated the message, for example:
Memory device bank location:
Bank_1
Memory device location:
<Device name in
chassis>
Specifies the location of the memory module in
the chassis, for example:
Memory device location: DIMM_A
Number of devices
required for full
redundancy:
<Number>
Specifies the number of power supply or cooling
devices required to achieve full redundancy, for
example:
Number of devices required for
full redundancy: 4
Possible memory module
event cause:
<list of
causes>
Specifies a list of possible causes for the memory
module event, for example:
Possible memory module event
cause: Single bit warning error
rate exceeded
Single bit error logging disabled
Table 1-2. Event Description Reference (continued)
Description Line Item Explanation