Messages Reference Guide

226 Index
AC power cord sensor has
failed, 47, 67
AC power has been lost, 48
AC power has been restored, 47
All virtual disks are missing from
the controller. This situation
was discovered during
system start-up., 211
An attempt to hot plug an EMM
has been detected. This type
of hot plug is not
supported., 187
An EMM has been
discovered., 182
An EMM has been inserted., 184
An EMM has been removed., 184
An enclosure blink has
ceased, 169
An enclosure blink operation has
initiated., 169
An invalid SAS configuration has
been detected., 143
Array Manager is installed on the
system, 124
Asset name changed, 131
Asset tag changed, 130
Automatic System Recovery
(ASR) action was
performed, 18
B
Background initialization
cancelled, 122
Background initialization
completed, 123
Background initialization
failed, 122
Background initialization
started, 122
Bad block extended medium
error, 130
Bad block extended sense
error, 130
Bad block medium error, 130
Bad block replacement error, 129
Bad block sense error, 129
Bad block table is 80% full., 188
Bad block table is full. Unable to
log block %1, 188
Bad PHY %1, 185
Battery charge in progress, 155
Battery charge process
interrupted, 155
battery messages, 75
BIOS Generated System
Events, 70
bios generated system
messages, 70
BMC Watchdog Events, 64
BMC watchdog messages, 64