Messages Reference Guide

234 Index
The controller battery Learn
cycle has started., 141
The controller battery Learn
cycle has timed out., 142
The controller battery Learn
cycle will start in %
days., 143
The controller battery needs to
be replaced., 137
The controller battery
temperature is above
normal, 138
The controller battery
temperature is above
normal., 154
The controller battery
temperature is normal., 138
The controller cache has been
discarded., 145
The controller debug log file has
been exported., 162
The controller has recovered
cached data from the
BBU., 202
The controller is unable to
recover cached data from the
battery backup unit
(BBU)., 201
The controller reconstruct rate
has changed., 172
The controller write policy has
been changed to Write
Back., 146
The controller write policy has
been changed to Write
Through., 146
The current kernel version and
the non-RAID SCSI driver
version are older than the
minimum required levels.See
the Readme file for a list of
validated kernel and driver
versions., 136
The DC power supply is
switched off., 194
The dedicated hot spare is too
small., 175
The EMM has failed., 183
The enclosure cannot support
both SAS and SATA physical
disks. Physical disks may be
disabled., 186
The enclosure has a hardware
error., 186
The enclosure is not
responding., 186
The enclosure is unstable., 185
The enclosure temperature has
returned to normal., 207
The factory default settings have
been restored., 202
The firmware on the EMMs is
not the same version. EMM0
%1 EMM1 %2, 190
The global hot spare is too
small., 175