Messages Reference Guide

Event Message Reference 47
AC Power Cord Messages
AC power cord messages listed in Table 2-12 provide status and warning
information for power cords that are part of an AC power switch, if your
system supports AC switching.
Table 2-12. AC Power Cord Messages
Event
ID
Description Severity Cause
1500 AC power cord sensor
has failed Sensor
location: <Location in
chassis>
Chassis location:
<Name of chassis>
Information An AC power cord sensor in
the specified system failed.
The AC power cord status
cannot be monitored. The
sensor location and chassis
location information are
provided.
1501 AC power cord is not
being monitored
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Information The AC power cord status is
not being monitored. This
occurs when a system’s
expected AC power
configuration is set to
nonredundant. The sensor
location and chassis location
information are provided.
1502 AC power has been
restored
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Information An AC power cord that did
not have AC power has had
the power restored.
The sensor location and
chassis location information
are provided.