Messages Reference Guide

58 System Event Log Messages for IPMI Systems
Voltage Sensor Events
The voltage sensor event messages monitor the number of volts across critical
components. These messages provide status and warning information for
voltage sensors for a particular chassis.
< Sensor Name/Location >
temperature sensor
returned to warning state
<
Reading >.
Warning Temperature of the backplane
board, system board, or the carrier
in the specified system <Sensor
Name/Location> returned from
critical state to non-critical state.
<
Sensor Name/Location >
temperature sensor
returned to normal state
<
Reading >.
Information Temperature of the backplane
board, system board, or the carrier
in the specified system <Sensor
Name/Location> returned to
normal operating range.
Table 3-2. Voltage Sensor Events
Event Message Severity Cause
<Sensor Name/Location>
voltage sensor detected
a failure <Reading> where
<Sensor Name/Location> is
the entity that this sensor
is monitoring.
Reading is specified in
volts.
For example, 3.860 V.
Critical The voltage of the monitored
device has exceeded the critical
threshold.
<Sensor Name/Location>
voltage sensor state
asserted.
Critical The voltage specified by
<Sensor Name/Location> is in
critical state.
<Sensor Name/Location>
voltage sensor state
de-asserted.
Information The voltage of a previously
reported
<Sensor Name/Location> is
returned to normal state.
Table 3-1. Temperature Sensor Events (continued)
Event Message Severity Cause