Release Notes

file:///T|/htdocs/SOFTWARE/svradmin/5.5/en/README/readme_sa.txt[10/25/2012 1:19:17 PM]
To correct this problem, you must apply Microsoft IE HotFix Q818060
or KB839571 to Internet Explorer 6.0 SP1 on Windows 2000 server or
Windows 2003 server. HotFix Q818060 and KB839571 are available on
the "Dell Systems Management Tools and Documentation DVD" in the
"SYSMGMT\srvadmin\windows\HotFix" directory. See the following
Microsoft support articles for further instructions on applying
this HotFix:
(Windows 2000 Server) "http://support.microsoft.com?kbid=818060"
(Windows 2003 Server) "http://support.microsoft.com/kb/839571"
As explained in the Microsoft KB article, use the Registry
Editor ("regedit.exe") to browse to the following key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion
\Internet Settings\
If "DialupUseLanSettings" key is not present, create a registry item
for "DialupUseLanSettings" and set a value of "1". Make sure the
value type is "DWORD".
Note: HotFix Q818060 may still fail to install on Internet Explorer
6.0 SP1. If the error "This update requires Internet Explorer 6.0
SP1 to be installed" occurs, follow these steps:
1. Unzip "Q818060-Eng-IE6.zip".
2. From a Windows command shell, enter "Q818060.exe /C" to
extract the HotFix files to a directory.
3. In the command shell, switch to the directory and then enter
"ieupdate.exe Q818060".
4. Launch Internet Explorer, open the "Help" menu, and select
"About Internet Explorer". Verify that "Q818060" appears in
the "Update Versions" field.
#####################################################################
KNOWN ISSUE
#####################################################################
This section provides information on open issues with this release of
Server Administrator.
=====================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON ALL SUPPORTED OPERATING
SYSTEMS
=====================================================================
* On Dell PowerEdge 1950, 2950 and Dell PowerVault NX 1950 systems
with internal USB, BIOS setting configuration for Internal USB Port
is possible only if UA (User Accessible or external) USB ports are
set to All Ports On. If UA USB ports are not set to 'All Ports On'
and user tries to configure BIOS setting for Internal USB Port