User's Manual

120 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
Example Command for Adding Extended Warranty Information
To provide a value for an extended warranty parameter, type a command of
the form: omconfig system assetinfo info=extwarranty <name=value pair 2>
or omconfig servermodule assetinfo info=extwarranty <name=value pair 2>.
For example, type:
omconfig system assetinfo info=extwarranty
enddate=012503
or
omconfig servermodule assetinfo info=extwarranty
enddate=012503
The following message appears:
Asset information set successfully.
You can enter more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information."
Adding Lease Information
A lease is an agreement to pay for the use of a system for a specified period of
time. The lessor retains ownership of the system. Table 5-5 shows the valid
parameters for the command.
Table 5-5. omconfig system assetinfo info=lease/omconfig servermodule assetinfo
info=lease
Command
Level 1
Command
Level 2
Comman
d Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description
omconfig
system/server
module
assetinfo
info=lease
buyout=
<amount>
Amount of money paid to
purchase a system from a lessor.
lessor=
<lessor>
Business entity that is leasing
the system out.