User's Manual

138 Using the Storage Management Service
omreport Temperature Probe Status
Table 6-9 describes the syntax for the omreport Probe Commands
Table 6-9. omreport Temperature Probe Commands
Required Command Levels
(1, 2, 3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to
the system.
controller=id enclosure=
<ENCLOSUREID>
info=temps
where id is the controller
number and
<ENCLOSUREID>
is
the enclosure ID. Example
for SCSI controllers:
controller=0 enclosure=2
info=temps. Example for
SAS controllers:
controller=0 enclosure=
1:2 info=temps.
Displays the temperature
probes for the specified
enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=temps index=n
where id is the controller
number and
<ENCLOSUREID> is the
enclosure number and “n” is
the number of a temperature
probe. For example:
controller=0 enclosure=2
info=temps index=1
Displays the temperature
probes for the specified
enclosure.