User's Manual

148 Using the Storage Management Service
Complete Syntax
omconfig storage controller action=enablealarm
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To enable the alarm on controller 1, enter:
omconfig storage controller action=enablealarm
controller=1
omconfig Disable Controller Alarm
Use the following omconfig command syntax to disable the controller alarm.
See the Dell OpenManage Online Help for more information about Disable
Controller Alarm.
Complete Syntax
omconfig storage controller action=disablealarm
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To disable the alarm on controller 1, enter:
omconfig storage controller action=disablealarm
controller=1
omconfig Quiet Controller Alarm
Use the following omconfig command syntax to silence an activated
controller alarm. See the Dell OpenManage Online Help for more information
about Quite Controller Alarm.