User's Manual

Using the Storage Management Service 171
Example for SAS Controllers
To assign the dedicated hot spare described in this example, enter:
omconfig storage vdisk action=
assigndedicatedhotspare controller=1 vdisk=4
pdisk=0:2:3 assign=yes
omconfig Unassign Dedicated Hot Spare
Use the following omconfig command syntax to unassign one or more
physical disks previously assigned as a hot spare to a virtual disk.
Complete Syntax
omconfig storage vdisk action=
assigndedicatedhotspare controller=id vdisk=id
pdisk=<PDISKID> assign=no
where id is the controller ID and virtual disk ID. The <PDISK> variable
specifies the physical disk.
To obtain the values for the controller, virtual disk, and physical disk, enter
omreport storage controller to display the controller IDs and then enter
omreport storage vdisk controller=ID and omreport storage pdisk
controller=ID to display the IDs for the virtual disks and physical disks
attached to the controller.
Example Syntax
In this example, you are unassigning physical disk 3 on connector 0 of
controller 1 as a dedicated hot spare to virtual disk 4. On a SAS controller, the
physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Controllers
To unassign the dedicated hot spare described in this example, enter:
omconfig storage vdisk action=
assigndedicatedhotspare controller=1 vdisk=4
pdisk=0:3 assign=no