User's Manual

50 omreport: Viewing System Status Using the Instrumentation Service
omreport chassis remoteaccess/omreport mainsystem remoteaccess
Use the omreport chassis remoteaccess or omreport mainsystem
remoteaccess command to view general information on baseboard
management controller (BMC) and
remote access if DRAC is installed.
Ty p e :
omreport chassis remoteaccess
or
omreport mainsystem remoteaccess
NOTE: This command is applicable to Dell PowerEdge x8xx and x9xx systems only.
The output of the omreport chassis remoteaccess/omreport mainsystem
remoteaccess command lists each of the valid parameters. Table 3-5 shows
the available settings.
omreport chassis slots/omreport mainsystem slots
Use the omreport chassis slots or omreport mainsystem slots command to
view properties of your system’s slots.
Ty p e :
omreport chassis slots index=
n
or
omreport mainsystem slots index=
n
Table 3-5. omreport chassis remoteaccess/omreport mainsystem remoteaccess
name=value pair Description
config=advsol Reports advanced BMC/iDRAC or remote access information on a
serial over local area network (LAN) connection.
config=nic Reports BMC/iDRAC or remote access information for the LAN.
config=serial Reports serial port information for BMC or remote access.
config=serialoverlan Reports BMC/iDRAC or remote access information on a serial over
LAN connection.
config=terminalmode Reports terminal mode settings for the serial port.
config=user Reports information on BMC/iDRAC or remote access users.