User's Manual

52 omreport: Viewing System Status Using the Instrumentation Service
omreport system Commands/omreport
servermodule Commands
Use the omreport system or omreport servermodule commands to view logs,
threshold values, cost of ownership information, and information about how
shutdown actions and recovery actions are configured.
omreport system/omreport servermodule
Use the omreport system or omreport servermodule command to see a
general status of the components of your system. When you specify a level 3
command, such as omreport system shutdown/omreport servermodule
shutdown, you can get detailed information for one system component rather
than the high-level status obtained with omreport system or omreport
servermodule.
Ty p e :
omreport system
or
omreport servermodule
If your system has both a main system chassis/main system and at least one
direct attached storage device, Server Administrator may display a summary
that resembles the following example.
NOTE: As with all output shown in this guide, the following output is an example
and may vary depending on your system configuration.
Commands for Viewing Logs
You can use the omreport system or omreport servermodule command to
view logs: the alert log, the command log, and the hardware or ESM log.
NOTE: If the Alert log or Command log displays invalid XML data (such as when
XML data generated for the selection is not well-formed), to clear the log and
resolve the issue."
omconfig system alertlog action=clear" or
"
omconfig system cmdlog action=clear" resolves the issue.
SEVERITY : COMPONENT
Ok : Main System Chassis
Critical : Storage