Users Guide

Remote Access Controller 77
c Specify the Dial-In Authentication settings that dial-in connections
require:
•
Any — Allows the connection to use any type of encryption,
including no encryption
•
Encrypted — Requires the connection to use some type of
encryption
•
CHAP — Requires the connection to use the CHAP
5 To enable SMTP server address control, click the check box next to Enable
SMTP
, and type the SMTP server address in the SMTP (Email) Server
Address
field.
6 Click Apply Changes and click OK to save your changes.
Configuring the DRAC Alert Properties
DRACs can be configured to respond to alert conditions from the system's
ESM or to other conditions such as operating-system crashes or power
failures.
DRACs offer the following types of alert actions:
• Alphanumeric paging (DRAC IIIs only) (See "Adding and Configuring
DRAC Users" for information about configuring this type of alert action.)
• Numeric paging (DRAC IIIs only) (See "Adding and Configuring DRAC
Users" for information about configuring this type of alert action.)
• E-mail (See "Adding and Configuring DRAC Users" for information about
configuring this type of alert action.)
• SNMP traps (See the following subsection for information about
configuring this type of alert action.)
book.book Page 77 Monday, July 7, 2008 2:59 PM