Users Guide

Remote Access Controller 81
5 Enter the phone number used by the system's modem in the Phone
Number
field.
6 Enter the user name for the demand dial-out user in the User Name field.
7 Enter the password for the demand dial-out user in the Password field.
8 Select a setting from the Authentication drop-down menu:
•
Any — Allows the connection using any type of encryption, including
no encryption
•
Encrypted — Requires the connection to use some type of encryption
•
CHAP — Requires the connection to use the CHAP
9 Click Apply Changes and click OK to save your changes.
Configuring the DRAC III Modem Settings
NOTE: You must have Administrator privileges in Server Administrator to use the
Remote Access Controller.
If your DRAC III kit includes the optional PCMCIA modem, you must
configure the modem prior to use.
To configure the DRAC III modem, perform the following steps:
1
Click System → Main System Chassis → Remote Access and then click the
Configuration tab.
2 Click Modem .
3 For Dial Mode , choose either Pulse or Tone .
4 From the Country Code drop-down menu, select the country where the
DRAC III is located.
5 For Initialization String , enter the required initialization string for the
DRAC III modem in the text field.
6 Select a Baud Rate setting from the drop-down menu (the default is 38400 ).
7 Click Apply Changes , and then click OK to save your changes.
book.book Page 81 Monday, July 7, 2008 2:59 PM