User's Manual

Using the Storage Management Service 157
omreport EMM Status
NOTE: The status of the EMMs is displayed as degraded if there is a mismatch
between the EMM firmware.
Table 6-12 describes the syntax for the omreport EMM Commands
Table 6-12. omreport EMM Commands
Required Command Levels
(1, 2, 3) and name=value
pair
Optional name=value pairs Use
omreport storage enclosure Displays property
information for all enclosures
attached to the system.
controller=id enclosure=
<ENCLOSUREID>
info=emms
where id is the controller
number and
ENCLOSUREID is the
enclosure number.
For example: controller=0
enclosure=2
Displays the enclosure
management modules
(EMMs) for the specified
enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=emms index=n
where id is the controller
number and
ENCLOSUREID is the
enclosure number and “n”
is the number of an EMM.
For example: controller=0
enclosure=2
info=emms index=1
Displays the specified
EMMs.