User's Manual

Using the Storage Management Service 229
Example Syntax
To rescan connector 2 on controller 1, enter:
omconfig storage connector action=rescan
controller=1 connector=2
omconfig Enclosure Commands
The following sections provide the omconfig command syntax required to
execute enclosure tasks.
Table 6-26. omconfig Enclosure Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage enclosure
action=enablealarm controller=id enclosure=
<ENCLOSUREID>
action=disablealarm controller=id enclosure=
<ENCLOSUREID>
action=setassettag controller=id enclosure=
<ENCLOSUREID> assettag=<string>
action=setassetname controller=id enclosure=
<ENCLOSUREID> assetname=<string>
action=settempprobes controller=id enclosure=
<ENCLOSUREID> index=id minwarn=n
maxwarn=n
action=resettempprobes controller=id enclosure=
<ENCLOSUREID> index=id
action=setalltempprobes controller=id
enclosure=<ENCLOSUREID> minwarn=n
maxwarn=n
action=resetalltempprobes controller=id
enclosure=<ENCLOSUREID>
action=blink controller=id
enclosure=<ENCLOSUREID>