SNMP Reference Guide

Traps 695
Chassis intrusion
state:
<Intrusion state>
Specifies the chassis intrusion state (open or
closed), for example:
Chassis intrusion state: Open
Chassis location:
<Name of chassis>
Specifies the name of the chassis that
generated the message, for example:
Chassis location: Main System
Chassis
Configuration error
type: <type of
configuration error>
Specifies the type of configuration error that
occurred, for example:
Configuration error type:
Revision mismatch
Current sensor value
(in Amps): <Reading>
Specifies the current sensor value in amps,
for example:
Current sensor value: 7.853
Date and time of
action:
<Date and time>
Specifies the date and time that an automatic
server recovery action was performed, for
example:
Date and time of action:
Fri May 30 23:55:44 2003.
Description:
<Description of event>
Specifies the description of the event that
occurred, for example:
Description: Chipset Err:
Critical Event sensor, front
panel NMI / diagnostic interrupt
was asserted.
Device location:
<Location in chassis>
Specifies the location of the device in the
specified chassis, for example:
Device location: Mem Card A
Discrete current state:
<State>
Specifies the state of the current sensor, for
example:
Discrete current state: Good
Table 26-1. Trap Description Reference (continued)
Description Line Item Explanation