SNMP Reference Guide

Traps 715
Memory Device Traps
Memory device messages provide status and warning information for memory
modules present in a particular system. Memory devices determine health
status by counting the number of ECC memory corrections.
NOTE: A value of failure or non-recoverable does not indicate a system
failure or loss of data, but rather that the specified system exceeded the specified
ECC correction threshold. Although the system continues to function, you should
perform system maintenance as described in Table 26-10.
Power Supply Failure
1354 Power supply detected a
failure
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
Power Supply type:
<type of power supply>
<Additional power
supply status
information>
If in configuration
error state:
Configuration error
type: <type of
configuration error>
Error A power supply has been
disconnected or has failed.
The sensor location, chassis
location, previous state, and
additional information
about the power supply
event are provided.
Table 26-9. Power Supply Traps
(continued)
Trap ID Description Severity Cause